WAGR Relay Cabin
Some of the stations where these relay cabins were installed include Mundijong and Mundijong Junction, Serpentine, Keysbrook and Pinjarra. Several of the relay cabins are still in use and largely unchanged, apart from replacement of the original corrugated asbestos roofing with iron in the early 2000's.
The 3D-printed model measures 71 mm long x 45 mm wide (not included the roof overhang) and 55 mm high above ground level. The model includes an extra 5 mm deep "foundation" when can be recessed into the layout scenery to allow for slight undulations in the ground surface.
This model is printed by i.Materialise in their Prime Gray material, but will not be available for sale from the i.Materialise Gallery. Contact Marbelup Models for availability. The prices is approx. $90 subject to exchange rate variations.
Back to Marbelup Models Home Page